BEC Audio dmc1 Instruções de Operação descarregar pdf (Página 13)

dmc1

2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com

Page

dmc1

from

dmc1

marked locations with the screws provided as shown in figure 17. FAILURE

TO PROPERLY MOUNT THE AMPLIFIER MAY LEAD TO AMPLIFIER DAMAGE AND

/OR

VOLUME CONTROL

/PREAMP WIRING DAMAGE.

dmc1 Connection

Locate the MS7X5SC cable from the dmc1 master. Connect

each of the 7 colored wires and shield drain wire from the

MS7XSC cable to the 8 pin terminal block as shown in

figure 18. Plug the 8 pin

connector into the jack labeled

PREAMP INTERCONNECT. Locate

the MS7X5SC cable from the

second power amplifier

(MC960PA), if used. Connect

each of the 7 colored wires and

shield drain wire from the

MS7XSC cable to the 8 pin

terminal block as shown in figure 18. Plug the

8 pin connector into the jack labeled TO

SECOND AMP.

Gather all volume control cables (MS5XSC).

Pigtail all shield drain wires (bare) from the

MS5XSC cables to the SHIELD terminal on the

remote amplifier. Then connect each of the color-

coded wires to its respective terminals as shown in Figure 19.

Figure 18 – Wiring

dia

ram

Figure 19 – Wiring

connections

1 2 ... 8 9 10 11 12 13 14 15 16

Sem comentários

BEC Audio dmc1 Instruções de Operação Página 13